Project: More than just one shape

<Stolcad® Professional allows you to give windows any shapes and enrich them with both fancy and standard posts, crossbars and muntin bars. This series is devoted to the software features which lead to the construction of those various shapes.
The front doorPosition 1: The front doorHeavy, two sash doors with a fanlight enriched with muntin bars. The shape can be designed by adding just a few leading points, inserting bars, sashes and panels and finally filling it with a grid of muntin bars.
Arched window − 2 piecesPosition 2: Arched window − 2 piecesAn image of two identical window constructions. The design is reduced to using one of the predefined shapes in Stolcad® Professional, and determining the height of the crossbar and the distance between the vertical muntin bars.
Rectangle-basedPosition 3: Rectangle-basedThe construction was made on the basis of a rectangular shape, which was then modified by placing several leading points. The designer quickly made it symmetrical using a handy table with dimensions.
Triangle-basedPosition 4: Triangle-basedThese two items of the order are symmetrical reflections of each other.The designer used the program function which serves to quickly create a mirror image of a construction. Therefore, in practice it saves time by reducing the number of the designed structures.
Position 1: The front doorReal visualisation of construction
A rectangular window with a customized barPosition 5: A rectangular window with a customized barModern solutions are not exclusively reserved for unconventional designs. As is presented in the attached picture, a window designed in Stolcad® Professional may comprise crossbars with any degree of bending.
A balcony setPosition 6: A balcony setDue to the fact that the project was created on a single surface, it was easy to measure the height and the degree of bending of each crossbar.
A multi-sash constructionPosition 7: A multi-sash constructionThe design has been complemented with crossbars, whose shape has been achieved using several leading points. The effect has been obtained by inserting a single crossbar across the entire width of the project. The software automatically recognized the division created by the earlier inserted posts.
A double-hung windowPosition 8: A double-hung windowThe construction has been designed using a number of coordinate values, which were professionally dimensioned. Next, the frame, sashes, fillings and standard muntin bars grid were inserted.
A multi-sash arch constructionPosition 9: A multi-sash arch constructionThe curvature was achieved on the basis of a few leading points, whose height was easily dimensioned using a handy table with the dimensions. An additional character was given to the construction by inserting muntin bars.
A double-hung multi-sash windowPosition 10: A double-hung multi-sash windowThe project presents a multi-sash arc construction. The shape was achieved with the use of leading points. After entering the frame, posts, sashes and glazing, the standard grid of muntin bars was inserted into the design.
A round windowPosition 11: A round windowThe design was prepared using a predefined shape available in Stolcad® Professional. In order to obtain the symmetrical shape, it was enough to enter the radius of the window with no need for any further calculations.The muntin bars have been inserted with the use of the "grid" option, which automatically distributes muntin bars evenly.
Position 5Real visualisation of a rectangular window
Position 7Real visualisation of a multi-sash construction
Position 10Real visualisation of a double-hung multi-sash window
Position 9Real visualisation of a multi-sash arch construction
Position 8Real visualisation of a double-hung window
Position 6Real visualisation of a balcony set
Position 11Real visualisation of a round window